commit b850307b279cbd12ab8c654d1a3dfe55319cc475 Author: Greg Kroah-Hartman Date: Thu Jun 11 09:23:02 2020 +0200 Linux 4.14.184 commit 0768f08ecdd76d97ca51c48fd963cdb2855b56e4 Author: Oleg Nesterov Date: Mon May 4 18:47:25 2020 +0200 uprobes: ensure that uprobe->offset and ->ref_ctr_offset are properly aligned commit 013b2deba9a6b80ca02f4fafd7dedf875e9b4450 upstream. uprobe_write_opcode() must not cross page boundary; prepare_uprobe() relies on arch_uprobe_analyze_insn() which should validate "vaddr" but some architectures (csky, s390, and sparc) don't do this. We can remove the BUG_ON() check in prepare_uprobe() and validate the offset early in __uprobe_register(). The new IS_ALIGNED() check matches the alignment check in arch_prepare_kprobe() on supported architectures, so I think that all insns must be aligned to UPROBE_SWBP_INSN_SIZE. Another problem is __update_ref_ctr() which was wrong from the very beginning, it can read/write outside of kmap'ed page unless "vaddr" is aligned to sizeof(short), __uprobe_register() should check this too. Reported-by: Linus Torvalds Suggested-by: Linus Torvalds Signed-off-by: Oleg Nesterov Reviewed-by: Srikar Dronamraju Acked-by: Christian Borntraeger Tested-by: Sven Schnelle Cc: Steven Rostedt Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds [ check for ref_ctr_offset removed for backport - gregkh ] Signed-off-by: Greg Kroah-Hartman commit f8b755d81db4b0ef5c8f21f4f80b6292cdbe006a Author: Mathieu Othacehe Date: Sun May 3 11:29:55 2020 +0200 iio: vcnl4000: Fix i2c swapped word reading. [ Upstream commit 18dfb5326370991c81a6d1ed6d1aeee055cb8c05 ] The bytes returned by the i2c reading need to be swapped unconditionally. Otherwise, on be16 platforms, an incorrect value will be returned. Taking the slow path via next merge window as its been around a while and we have a patch set dependent on this which would be held up. Fixes: 62a1efb9f868 ("iio: add vcnl4000 combined ALS and proximity sensor") Signed-off-by: Mathieu Othacehe Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit 2a24563e93e40448fed093679668445c22fc226d Author: Josh Poimboeuf Date: Mon Apr 27 20:46:13 2020 +0200 x86/speculation: Add Ivy Bridge to affected list commit 3798cc4d106e91382bfe016caa2edada27c2bb3f upstream Make the docs match the code. Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman commit 1fd6b5a9236cd202e449aab99fbd527a3cca4b3c Author: Mark Gross Date: Thu Apr 16 18:21:51 2020 +0200 x86/speculation: Add SRBDS vulnerability and mitigation documentation commit 7222a1b5b87417f22265c92deea76a6aecd0fb0f upstream Add documentation for the SRBDS vulnerability and its mitigation. [ bp: Massage. jpoimboe: sysfs table strings. ] Signed-off-by: Mark Gross Signed-off-by: Borislav Petkov Reviewed-by: Tony Luck Reviewed-by: Josh Poimboeuf Signed-off-by: Greg Kroah-Hartman commit 9ecf57e4aaca7197ab0f196e8a7b74d57e974ad9 Author: Mark Gross Date: Thu Apr 16 17:54:04 2020 +0200 x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation commit 7e5b3c267d256822407a22fdce6afdf9cd13f9fb upstream SRBDS is an MDS-like speculative side channel that can leak bits from the random number generator (RNG) across cores and threads. New microcode serializes the processor access during the execution of RDRAND and RDSEED. This ensures that the shared buffer is overwritten before it is released for reuse. While it is present on all affected CPU models, the microcode mitigation is not needed on models that enumerate ARCH_CAPABILITIES[MDS_NO] in the cases where TSX is not supported or has been disabled with TSX_CTRL. The mitigation is activated by default on affected processors and it increases latency for RDRAND and RDSEED instructions. Among other effects this will reduce throughput from /dev/urandom. * Enable administrator to configure the mitigation off when desired using either mitigations=off or srbds=off. * Export vulnerability status via sysfs * Rename file-scoped macros to apply for non-whitelist table initializations. [ bp: Massage, - s/VULNBL_INTEL_STEPPING/VULNBL_INTEL_STEPPINGS/g, - do not read arch cap MSR a second time in tsx_fused_off() - just pass it in, - flip check in cpu_set_bug_bits() to save an indentation level, - reflow comments. jpoimboe: s/Mitigated/Mitigation/ in user-visible strings tglx: Dropped the fused off magic for now ] Signed-off-by: Mark Gross Signed-off-by: Borislav Petkov Signed-off-by: Thomas Gleixner Reviewed-by: Tony Luck Reviewed-by: Pawan Gupta Reviewed-by: Josh Poimboeuf Tested-by: Neelima Krishnan Signed-off-by: Greg Kroah-Hartman commit 9c98ba3f69b156c9fee72b71260d51f623a4a457 Author: Mark Gross Date: Thu Apr 16 17:32:42 2020 +0200 x86/cpu: Add 'table' argument to cpu_matches() commit 93920f61c2ad7edb01e63323832585796af75fc9 upstream To make cpu_matches() reusable for other matching tables, have it take a pointer to a x86_cpu_id table as an argument. [ bp: Flip arguments order. ] Signed-off-by: Mark Gross Signed-off-by: Borislav Petkov Signed-off-by: Thomas Gleixner Reviewed-by: Josh Poimboeuf Signed-off-by: Greg Kroah-Hartman commit ae585de4296413ae4bbb8f2ac09faa38ff78f4cd Author: Mark Gross Date: Thu Apr 16 17:23:10 2020 +0200 x86/cpu: Add a steppings field to struct x86_cpu_id commit e9d7144597b10ff13ff2264c059f7d4a7fbc89ac upstream Intel uses the same family/model for several CPUs. Sometimes the stepping must be checked to tell them apart. On x86 there can be at most 16 steppings. Add a steppings bitmask to x86_cpu_id and a X86_MATCH_VENDOR_FAMILY_MODEL_STEPPING_FEATURE macro and support for matching against family/model/stepping. [ bp: Massage. tglx: Lightweight variant for backporting ] Signed-off-by: Mark Gross Signed-off-by: Borislav Petkov Signed-off-by: Thomas Gleixner Reviewed-by: Tony Luck Reviewed-by: Josh Poimboeuf Signed-off-by: Greg Kroah-Hartman commit 992ba3f7b87df3a130c0de315983ee53191290d2 Author: Srinivas Kandagatla Date: Fri May 22 12:33:41 2020 +0100 nvmem: qfprom: remove incorrect write support commit 8d9eb0d6d59a5d7028c80a30831143d3e75515a7 upstream. qfprom has different address spaces for read and write. Reads are always done from corrected address space, where as writes are done on raw address space. Writing to corrected address space is invalid and ignored, so it does not make sense to have this support in the driver which only supports corrected address space regions at the moment. Fixes: 4ab11996b489 ("nvmem: qfprom: Add Qualcomm QFPROM support.") Signed-off-by: Srinivas Kandagatla Reviewed-by: Douglas Anderson Cc: stable Link: https://lore.kernel.org/r/20200522113341.7728-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman commit bc41ae15d52ef089a2de6b137d9408dde7624ee9 Author: Oliver Neukum Date: Tue May 26 14:44:20 2020 +0200 CDC-ACM: heed quirk also in error handling commit 97fe809934dd2b0b37dfef3a2fc70417f485d7af upstream. If buffers are iterated over in the error case, the lower limits for quirky devices must be heeded. Signed-off-by: Oliver Neukum Reported-by: Jean Rene Dawin Fixes: a4e7279cd1d19 ("cdc-acm: introduce a cool down") Cc: stable Link: https://lore.kernel.org/r/20200526124420.22160-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit b9e0cdab2e9b7f58379e5440dfa1d500bc9e33bf Author: Pascal Terjan Date: Sat May 23 22:12:47 2020 +0100 staging: rtl8712: Fix IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK commit 15ea976a1f12b5fd76b1bd6ff3eb5132fd28047f upstream. The value in shared headers was fixed 9 years ago in commit 8d661f1e462d ("ieee80211: correct IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK macro") and while looking at using shared headers for other duplicated constants I noticed this driver uses the old value. The macros are also defined twice in this file so I am deleting the second definition. Signed-off-by: Pascal Terjan Cc: stable Link: https://lore.kernel.org/r/20200523211247.23262-1-pterjan@google.com Signed-off-by: Greg Kroah-Hartman commit 94d8520821d03254a0734264a62ba9e8d2634d2d Author: Jiri Slaby Date: Tue May 26 16:56:32 2020 +0200 tty: hvc_console, fix crashes on parallel open/close commit 24eb2377f977fe06d84fca558f891f95bc28a449 upstream. hvc_open sets tty->driver_data to NULL when open fails at some point. Typically, the failure happens in hp->ops->notifier_add(). If there is a racing process which tries to open such mangled tty, which was not closed yet, the process will crash in hvc_open as tty->driver_data is NULL. All this happens because close wants to know whether open failed or not. But ->open should not NULL this and other tty fields for ->close to be happy. ->open should call tty_port_set_initialized(true) and close should check by tty_port_initialized() instead. So do this properly in this driver. So this patch removes these from ->open: * tty_port_tty_set(&hp->port, NULL). This happens on last close. * tty->driver_data = NULL. Dtto. * tty_port_put(&hp->port). This happens in shutdown and until now, this must have been causing a reference underflow, if I am not missing something. Signed-off-by: Jiri Slaby Cc: stable Reported-and-tested-by: Raghavendra Link: https://lore.kernel.org/r/20200526145632.13879-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman commit 26079af52bf616bc492acc1fe41dce53fe199456 Author: Dmitry Torokhov Date: Mon May 25 16:27:40 2020 -0700 vt: keyboard: avoid signed integer overflow in k_ascii commit b86dab054059b970111b5516ae548efaae5b3aae upstream. When k_ascii is invoked several times in a row there is a potential for signed integer overflow: UBSAN: Undefined behaviour in drivers/tty/vt/keyboard.c:888:19 signed integer overflow: 10 * 1111111111 cannot be represented in type 'int' CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.11 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 ubsan_epilogue+0xe/0x30 lib/ubsan.c:154 handle_overflow+0xdc/0xf0 lib/ubsan.c:184 __ubsan_handle_mul_overflow+0x2a/0x40 lib/ubsan.c:205 k_ascii+0xbf/0xd0 drivers/tty/vt/keyboard.c:888 kbd_keycode drivers/tty/vt/keyboard.c:1477 [inline] kbd_event+0x888/0x3be0 drivers/tty/vt/keyboard.c:1495 While it can be worked around by using check_mul_overflow()/ check_add_overflow(), it is better to introduce a separate flag to signal that number pad is being used to compose a symbol, and change type of the accumulator from signed to unsigned, thus avoiding undefined behavior when it overflows. Reported-by: Kyungtae Kim Signed-off-by: Dmitry Torokhov Cc: stable Link: https://lore.kernel.org/r/20200525232740.GA262061@dtor-ws Signed-off-by: Greg Kroah-Hartman commit 234257c8709f8757b1a1092cdc4bd04f3a9f864f Author: Dinghao Liu Date: Sun May 24 21:50:49 2020 -0500 usb: musb: Fix runtime PM imbalance on error commit e4befc121df03dc8ed2ac1031c98f9538e244bae upstream. When copy_from_user() returns an error code, there is a runtime PM usage counter imbalance. Fix this by moving copy_from_user() to the beginning of this function. Fixes: 7b6c1b4c0e1e ("usb: musb: fix runtime PM in debugfs") Signed-off-by: Dinghao Liu Cc: stable@vger.kernel.org Signed-off-by: Bin Liu Link: https://lore.kernel.org/r/20200525025049.3400-7-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 20797d67c68af026ef1e4d0dfcc003d965faa314 Author: Bin Liu Date: Sun May 24 21:50:45 2020 -0500 usb: musb: start session in resume for host port commit 7f88a5ac393f39319f69b8b20cc8d5759878d1a1 upstream. Commit 17539f2f4f0b ("usb: musb: fix enumeration after resume") replaced musb_start() in musb_resume() to not override softconnect bit, but it doesn't restart the session for host port which was done in musb_start(). The session could be disabled in musb_suspend(), which leads the host port doesn't stay in host mode. So let's start the session specifically for host port in musb_resume(). Fixes: 17539f2f4f0b ("usb: musb: fix enumeration after resume") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu Link: https://lore.kernel.org/r/20200525025049.3400-3-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman commit 5837494357c1853baa618890d80be72aebe330b4 Author: Daniele Palmas Date: Mon May 25 23:11:06 2020 +0200 USB: serial: option: add Telit LE910C1-EUX compositions commit 399ad9477c523f721f8e51d4f824bdf7267f120c upstream. Add Telit LE910C1-EUX compositions: 0x1031: tty, tty, tty, rmnet 0x1033: tty, tty, tty, ecm Signed-off-by: Daniele Palmas Link: https://lore.kernel.org/r/20200525211106.27338-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit da380bf104009f9986275fe657907ee71dc44cc0 Author: Bin Liu Date: Wed May 13 16:36:46 2020 -0500 USB: serial: usb_wwan: do not resubmit rx urb on fatal errors commit 986c1748c84d7727defeaeca74a73b37f7d5cce1 upstream. usb_wwan_indat_callback() shouldn't resubmit rx urb if the previous urb status is a fatal error. Or the usb controller would keep processing the new urbs then run into interrupt storm, and has no chance to recover. Fixes: 6c1ee66a0b2b ("USB-Serial: Fix error handling of usb_wwan") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit ff9afd12c93a12e719350f03860924763c2e27af Author: Matt Jolly Date: Thu May 21 10:43:58 2020 +1000 USB: serial: qcserial: add DW5816e QDL support commit 3429444abdd9dbd5faebd9bee552ec6162b17ad6 upstream. Add support for Dell Wireless 5816e Download Mode (AKA boot & hold mode / QDL download mode) to drivers/usb/serial/qcserial.c This is required to update device firmware. Signed-off-by: Matt Jolly Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit c28c1bdab62e0653a54695671d9862a5c69b9b69 Author: Eric Dumazet Date: Fri May 29 11:32:25 2020 -0700 l2tp: add sk_family checks to l2tp_validate_socket [ Upstream commit d9a81a225277686eb629938986d97629ea102633 ] syzbot was able to trigger a crash after using an ISDN socket and fool l2tp. Fix this by making sure the UDP socket is of the proper family. BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018 CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382 __kasan_report.cold+0x20/0x38 mm/kasan/report.c:511 kasan_report+0x33/0x50 mm/kasan/common.c:625 setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523 l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline] genl_family_rcv_msg net/netlink/genetlink.c:718 [inline] genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e6/0x810 net/socket.c:2352 ___sys_sendmsg+0x100/0x170 net/socket.c:2406 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x45ca29 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4 Allocated by task 3018: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x161/0x7a0 mm/slab.c:3665 kmalloc include/linux/slab.h:560 [inline] sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612 sk_alloc+0x36/0x1100 net/core/sock.c:1666 data_sock_create drivers/isdn/mISDN/socket.c:600 [inline] mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Freed by task 2484: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] kasan_set_free_info mm/kasan/common.c:317 [inline] __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456 __cache_free mm/slab.c:3426 [inline] kfree+0x109/0x2b0 mm/slab.c:3757 kvfree+0x42/0x50 mm/util.c:603 __free_fdtable+0x2d/0x70 fs/file.c:31 put_files_struct fs/file.c:420 [inline] put_files_struct+0x248/0x2e0 fs/file.c:413 exit_files+0x7e/0xa0 fs/file.c:445 do_exit+0xb04/0x2dd0 kernel/exit.c:791 do_group_exit+0x125/0x340 kernel/exit.c:894 get_signal+0x47b/0x24e0 kernel/signal.c:2739 do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784 exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:279 [inline] do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305 entry_SYSCALL_64_after_hwframe+0x49/0xb3 The buggy address belongs to the object at ffff88808ed0c000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1424 bytes inside of 2048-byte region [ffff88808ed0c000, ffff88808ed0c800) The buggy address belongs to the page: page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00 raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 6b9f34239b00 ("l2tp: fix races in tunnel creation") Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Eric Dumazet Cc: James Chapman Cc: Guillaume Nault Reported-by: syzbot Acked-by: Guillaume Nault Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 5c336039843d40e949d1d4fe8dcd380229db795f Author: Willem de Bruijn Date: Mon May 25 15:07:40 2020 -0400 net: check untrusted gso_size at kernel entry [ Upstream commit 6dd912f82680761d8fb6b1bb274a69d4c7010988 ] Syzkaller again found a path to a kernel crash through bad gso input: a packet with gso size exceeding len. These packets are dropped in tcp_gso_segment and udp[46]_ufo_fragment. But they may affect gso size calculations earlier in the path. Now that we have thlen as of commit 9274124f023b ("net: stricter validation of untrusted gso packets"), check gso_size at entry too. Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.") Reported-by: syzbot Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit eba49f06f249015db77974dc568dbf2de94d8c7b Author: Stefano Garzarella Date: Wed May 27 09:56:55 2020 +0200 vsock: fix timeout in vsock_accept() [ Upstream commit 7e0afbdfd13d1e708fe96e31c46c4897101a6a43 ] The accept(2) is an "input" socket interface, so we should use SO_RCVTIMEO instead of SO_SNDTIMEO to set the timeout. So this patch replace sock_sndtimeo() with sock_rcvtimeo() to use the right timeout in the vsock_accept(). Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Stefano Garzarella Reviewed-by: Jorgen Hansen Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 5062415ef0cfffae81b79763b099b1ecc50f2f9b Author: Chuhong Yuan Date: Thu May 28 18:20:37 2020 +0800 NFC: st21nfca: add missed kfree_skb() in an error path [ Upstream commit 3decabdc714ca56c944f4669b4cdec5c2c1cea23 ] st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path. Add the missed function call to fix it. Fixes: 1892bf844ea0 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode") Signed-off-by: Chuhong Yuan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit b433a56f62df5ec078ffc55892c691b60123a360 Author: Daniele Palmas Date: Mon May 25 23:25:37 2020 +0200 net: usb: qmi_wwan: add Telit LE910C1-EUX composition [ Upstream commit 591612aa578cd7148b7b9d74869ef40118978389 ] Add support for Telit LE910C1-EUX composition 0x1031: tty, tty, tty, rmnet Signed-off-by: Daniele Palmas Acked-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 864bd400f045655b8e20431f5f1c682f9b0c1096 Author: Eric Dumazet Date: Fri May 29 11:20:53 2020 -0700 l2tp: do not use inet_hash()/inet_unhash() [ Upstream commit 02c71b144c811bcdd865e0a1226d0407d11357e8 ] syzbot recently found a way to crash the kernel [1] Issue here is that inet_hash() & inet_unhash() are currently only meant to be used by TCP & DCCP, since only these protocols provide the needed hashinfo pointer. L2TP uses a single list (instead of a hash table) This old bug became an issue after commit 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications") since after this commit, sk_common_release() can be called while the L2TP socket is still considered 'hashed'. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: sk_common_release+0xba/0x370 net/core/sock.c:3210 inet_create net/ipv4/af_inet.c:390 [inline] inet_create+0x966/0xe00 net/ipv4/af_inet.c:248 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x441e29 Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdce184148 EFLAGS: 00000246 ORIG_RAX: 0000000000000029 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441e29 RDX: 0000000000000073 RSI: 0000000000000002 RDI: 0000000000000002 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000402c30 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace 23b6578228ce553e ]--- RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 0d76751fad77 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Signed-off-by: Eric Dumazet Cc: James Chapman Cc: Andrii Nakryiko Reported-by: syzbot+3610d489778b57cc8031@syzkaller.appspotmail.com Signed-off-by: Greg Kroah-Hartman commit 3e246aad5b112333ad64fdb0f159faeeb9a83598 Author: Yang Yingliang Date: Sat May 30 11:34:33 2020 +0800 devinet: fix memleak in inetdev_init() [ Upstream commit 1b49cd71b52403822731dc9f283185d1da355f97 ] When devinet_sysctl_register() failed, the memory allocated in neigh_parms_alloc() should be freed. Fixes: 20e61da7ffcf ("ipv4: fail early when creating netdev named all or default") Signed-off-by: Yang Yingliang Acked-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit fe7de37720936ecfe4df514bcfa24cf0aac7e8ac Author: Dan Carpenter Date: Wed May 27 21:48:30 2020 +0300 airo: Fix read overflows sending packets commit 11e7a91994c29da96d847f676be023da6a2c1359 upstream. The problem is that we always copy a minimum of ETH_ZLEN (60) bytes from skb->data even when skb->len is less than ETH_ZLEN so it leads to a read overflow. The fix is to pad skb->data to at least ETH_ZLEN bytes. Cc: Reported-by: Hu Jiahui Signed-off-by: Dan Carpenter Reviewed-by: Eric Dumazet Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200527184830.GA1164846@mwanda Signed-off-by: Greg Kroah-Hartman commit 2d9fce5b57a3644ba0d3f807da97fdb2648c6a5a Author: Can Guo Date: Thu Dec 5 02:14:33 2019 +0000 scsi: ufs: Release clock if DMA map fails commit 17c7d35f141ef6158076adf3338f115f64fcf760 upstream. In queuecommand path, if DMA map fails, it bails out with clock held. In this case, release the clock to keep its usage paired. [mkp: applied by hand] Link: https://lore.kernel.org/r/0101016ed3d66395-1b7e7fce-b74d-42ca-a88a-4db78b795d3b-000000@us-west-2.amazonses.com Reviewed-by: Bean Huo Signed-off-by: Can Guo Signed-off-by: Martin K. Petersen [EB: resolved cherry-pick conflict caused by newer kernels not having the clear_bit_unlock() line] Signed-off-by: Eric Biggers Signed-off-by: Greg Kroah-Hartman commit a01794d3648dc4cffa5f1f4b8cdda057060cc4e1 Author: Jérôme Pouiller Date: Mon May 11 18:19:02 2020 +0200 mmc: fix compilation of user API commit 83fc5dd57f86c3ec7d6d22565a6ff6c948853b64 upstream. The definitions of MMC_IOC_CMD and of MMC_IOC_MULTI_CMD rely on MMC_BLOCK_MAJOR: #define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd) #define MMC_IOC_MULTI_CMD _IOWR(MMC_BLOCK_MAJOR, 1, struct mmc_ioc_multi_cmd) However, MMC_BLOCK_MAJOR is defined in linux/major.h and linux/mmc/ioctl.h did not include it. Signed-off-by: Jérôme Pouiller Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200511161902.191405-1-Jerome.Pouiller@silabs.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 7821131c16cb2d32a5014009b50d362317418556 Author: Daniel Axtens Date: Thu Jun 4 16:51:27 2020 -0700 kernel/relay.c: handle alloc_percpu returning NULL in relay_open commit 54e200ab40fc14c863bcc80a51e20b7906608fce upstream. alloc_percpu() may return NULL, which means chan->buf may be set to NULL. In that case, when we do *per_cpu_ptr(chan->buf, ...), we dereference an invalid pointer: BUG: Unable to handle kernel data access at 0x7dae0000 Faulting instruction address: 0xc0000000003f3fec ... NIP relay_open+0x29c/0x600 LR relay_open+0x270/0x600 Call Trace: relay_open+0x264/0x600 (unreliable) __blk_trace_setup+0x254/0x600 blk_trace_setup+0x68/0xa0 sg_ioctl+0x7bc/0x2e80 do_vfs_ioctl+0x13c/0x1300 ksys_ioctl+0x94/0x130 sys_ioctl+0x48/0xb0 system_call+0x5c/0x68 Check if alloc_percpu returns NULL. This was found by syzkaller both on x86 and powerpc, and the reproducer it found on powerpc is capable of hitting the issue as an unprivileged user. Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Reported-by: syzbot+1e925b4b836afe85a1c6@syzkaller-ppc64.appspotmail.com Reported-by: syzbot+587b2421926808309d21@syzkaller-ppc64.appspotmail.com Reported-by: syzbot+58320b7171734bf79d26@syzkaller.appspotmail.com Reported-by: syzbot+d6074fb08bdb2e010520@syzkaller.appspotmail.com Signed-off-by: Daniel Axtens Signed-off-by: Andrew Morton Reviewed-by: Michael Ellerman Reviewed-by: Andrew Donnellan Acked-by: David Rientjes Cc: Akash Goel Cc: Andrew Donnellan Cc: Guenter Roeck Cc: Salvatore Bonaccorso Cc: [4.10+] Link: http://lkml.kernel.org/r/20191219121256.26480-1-dja@axtens.net Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 0584768e5b936428ce958d69f9b5d35f18ad073d Author: Giuseppe Marco Randazzo Date: Mon Apr 6 00:06:59 2020 +0200 p54usb: add AirVasT USB stick device-id commit 63e49a9fdac1b4e97ac26cb3fe953f210d83bc53 upstream. This patch adds the AirVasT USB wireless devices 124a:4026 to the list of supported devices. It's using the ISL3886 usb firmware. Without this modification, the wiki adapter is not recognized. Cc: Signed-off-by: Giuseppe Marco Randazzo Signed-off-by: Christian Lamparter [formatted, reworded] Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200405220659.45621-1-chunkeey@gmail.com Signed-off-by: Greg Kroah-Hartman commit 021620b5fea17606e897caa337ce108cf787113f Author: Julian Sax Date: Tue May 5 17:10:42 2020 +0200 HID: i2c-hid: add Schneider SCL142ALM to descriptor override commit 6507ef10660efdfee93f0f3b9fac24b5e4d83e56 upstream. This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. Cc: stable@vger.kernel.org Signed-off-by: Julian Sax Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit ad503666564b61dc6c252179fef0efba6fd06dc5 Author: Scott Shumate Date: Wed May 13 13:39:26 2020 -0500 HID: sony: Fix for broken buttons on DS3 USB dongles commit e72455b898ac678667c5674668186b4670d87d11 upstream. Fix for non-working buttons on knock-off USB dongles for Sony controllers. These USB dongles are used to connect older Sony DA/DS1/DS2 controllers via USB and are common on Amazon, AliExpress, etc. Without the patch, the square, X, and circle buttons do not function. These dongles used to work prior to kernel 4.10 but removing the global DS3 report fixup in commit e19a267b9987 ("HID: sony: DS3 comply to Linux gamepad spec") exposed the problem. Many people reported the problem on the Ubuntu forums and are working around the problem by falling back to the 4.9 hid-sony driver. The problem stems from these dongles incorrectly reporting their button count as 13 instead of 16. This patch fixes up the report descriptor by changing the button report count to 16 and removing 3 padding bits. Cc: stable@vger.kernel.org Fixes: e19a267b9987 ("HID: sony: DS3 comply to Linux gamepad spec") Signed-off-by: Scott Shumate Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 469ef673629d36d8ed5912b52f5d87ecc0309b3c Author: Fan Yang Date: Thu Jun 4 18:22:07 2020 +0800 mm: Fix mremap not considering huge pmd devmap commit 5bfea2d9b17f1034a68147a8b03b9789af5700f9 upstream. The original code in mm/mremap.c checks huge pmd by: if (is_swap_pmd(*old_pmd) || pmd_trans_huge(*old_pmd)) { However, a DAX mapped nvdimm is mapped as huge page (by default) but it is not transparent huge page (_PAGE_PSE | PAGE_DEVMAP). This commit changes the condition to include the case. This addresses CVE-2020-10757. Fixes: 5c7fb56e5e3f ("mm, dax: dax-pmd vs thp-pmd vs hugetlbfs-pmd") Cc: Reported-by: Fan Yang Signed-off-by: Fan Yang Tested-by: Fan Yang Tested-by: Dan Williams Reviewed-by: Dan Williams Acked-by: Kirill A. Shutemov Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 9a77644c9295a3c4248b1e070d9ce509ead838c0 Author: Dinghao Liu Date: Sat May 23 16:08:20 2020 +0800 net: smsc911x: Fix runtime PM imbalance on error [ Upstream commit 539d39ad0c61b35f69565a037d7586deaf6d6166 ] Remove runtime PM usage counter decrement when the increment function has not been called to keep the counter balanced. Signed-off-by: Dinghao Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 44fafc855c790cac909444813cc3e65a075c2ade Author: Jonathan McDowell Date: Thu May 21 12:49:34 2020 +0100 net: ethernet: stmmac: Enable interface clocks on probe for IPQ806x [ Upstream commit a96ac8a0045e3cbe3e5af6d1b3c78c6c2065dec5 ] The ipq806x_gmac_probe() function enables the PTP clock but not the appropriate interface clocks. This means that if the bootloader hasn't done so attempting to bring up the interface will fail with an error like: [ 59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma [ 59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed [ 59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed This patch, a slightly cleaned up version of one posted by Sergey Sergeev in: https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257 correctly enables the clock; we have already configured the source just before this. Tested on a MikroTik RB3011. Signed-off-by: Jonathan McDowell Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit e0bdfe9d5551f858f2a6ead80230e03f0b2ca50b Author: Valentin Longchamp Date: Wed May 20 17:53:50 2020 +0200 net/ethernet/freescale: rework quiesce/activate for ucc_geth [ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ] ugeth_quiesce/activate are used to halt the controller when there is a link change that requires to reconfigure the mac. The previous implementation called netif_device_detach(). This however causes the initial activation of the netdevice to fail precisely because it's detached. For details, see [1]. A possible workaround was the revert of commit net: linkwatch: add check for netdevice being present to linkwatch_do_dev However, the check introduced in the above commit is correct and shall be kept. The netif_device_detach() is thus replaced with netif_tx_stop_all_queues() that prevents any tranmission. This allows to perform mac config change required by the link change, without detaching the corresponding netdevice and thus not preventing its initial activation. [1] https://lists.openwall.net/netdev/2020/01/08/201 Signed-off-by: Valentin Longchamp Acked-by: Matteo Ghidoni Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 1560e7d2f4ad5464b0198b588d933084136c2b75 Author: Jeremy Kerr Date: Tue May 19 09:05:58 2020 +0800 net: bmac: Fix read of MAC address from ROM [ Upstream commit ef01cee2ee1b369c57a936166483d40942bcc3e3 ] In bmac_get_station_address, We're reading two bytes at a time from ROM, but we do that six times, resulting in 12 bytes of read & writes. This means we will write off the end of the six-byte destination buffer. This change fixes the for-loop to only read/write six bytes. Based on a proposed fix from Finn Thain . Signed-off-by: Jeremy Kerr Reported-by: Stan Johnson Tested-by: Stan Johnson Reported-by: Finn Thain Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 68fbed1302254b766863b9340a9d3d9a739a0ce0 Author: Nathan Chancellor Date: Wed Apr 8 13:53:23 2020 -0700 x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables [ Upstream commit d7110a26e5905ec2fe3fc88bc6a538901accb72b ] When building with Clang + -Wtautological-compare and CONFIG_CPUMASK_OFFSTACK unset: arch/x86/mm/mmio-mod.c:375:6: warning: comparison of array 'downed_cpus' equal to a null pointer is always false [-Wtautological-pointer-compare] if (downed_cpus == NULL && ^~~~~~~~~~~ ~~~~ arch/x86/mm/mmio-mod.c:405:6: warning: comparison of array 'downed_cpus' equal to a null pointer is always false [-Wtautological-pointer-compare] if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0) ^~~~~~~~~~~ ~~~~ 2 warnings generated. Commit f7e30f01a9e2 ("cpumask: Add helper cpumask_available()") added cpumask_available() to fix warnings of this nature. Use that here so that clang does not warn regardless of CONFIG_CPUMASK_OFFSTACK's value. Reported-by: Sedat Dilek Signed-off-by: Nathan Chancellor Signed-off-by: Borislav Petkov Reviewed-by: Nick Desaulniers Acked-by: Steven Rostedt (VMware) Link: https://github.com/ClangBuiltLinux/linux/issues/982 Link: https://lkml.kernel.org/r/20200408205323.44490-1-natechancellor@gmail.com Signed-off-by: Sasha Levin commit 5f070c94f76f97ccebbb880073a52a61f1a20223 Author: Atsushi Nemoto Date: Fri May 8 22:12:48 2020 +0900 i2c: altera: Fix race between xfer_msg and isr thread [ Upstream commit 5d4c7977499a736f3f80826bdc9744344ad55589 ] Use a mutex to protect access to idev->msg_len, idev->buf, etc. which are modified by both altr_i2c_xfer_msg() and altr_i2c_isr(). This is the minimal fix for easy backporting. A cleanup to remove the spinlock will be added later. Signed-off-by: Atsushi Nemoto Acked-by: Thor Thayer [wsa: updated commit message] Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 815e65960ed8b5cb49e9b2b612247c9322fcddfd Author: Vineet Gupta Date: Tue Apr 14 11:41:51 2020 -0700 ARC: [plat-eznps]: Restrict to CONFIG_ISA_ARCOMPACT [ Upstream commit 799587d5731db9dcdafaac4002463aa7d9cd6cf7 ] Elide invalid configuration EZNPS + ARCv2, triggered by a make allyesconfig build. Granted the root cause is in source code (asm/barrier.h) where we check for ARCv2 before PLAT_EZNPS, but it is better to avoid such combinations at onset rather then baking subtle nuances into code. Reported-by: kbuild test robot Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin commit dc4495c71cb44dd1173479209e3e9c6970d5b4ce Author: Eugeniy Paltsev Date: Thu Apr 2 20:54:28 2020 +0300 ARC: Fix ICCM & DCCM runtime size checks [ Upstream commit 43900edf67d7ef3ac8909854d75b8a1fba2d570c ] As of today the ICCM and DCCM size checks are incorrectly using mismatched units (KiB checked against bytes). The CONFIG_ARC_DCCM_SZ and CONFIG_ARC_ICCM_SZ are in KiB, but the size calculated in runtime and stored in cpu->dccm.sz and cpu->iccm.sz is in bytes. Fix that. Reported-by: Paul Greco Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin commit e50da20ee88e3ff58bb027cfdb38b101935da71b Author: Guillaume Nault Date: Thu May 14 12:15:39 2020 +0200 pppoe: only process PADT targeted at local interfaces We don't want to disconnect a session because of a stray PADT arriving while the interface is in promiscuous mode. Furthermore, multicast and broadcast packets make no sense here, so only PACKET_HOST is accepted. Reported-by: David Balažic Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller commit fe3f7e15ace0866a879cd79f8c8fb908c09a7fb7 Author: Vasily Gorbik Date: Tue Dec 10 13:50:23 2019 +0100 s390/ftrace: save traced function caller [ Upstream commit b4adfe55915d8363e244e42386d69567db1719b9 ] A typical backtrace acquired from ftraced function currently looks like the following (e.g. for "path_openat"): arch_stack_walk+0x15c/0x2d8 stack_trace_save+0x50/0x68 stack_trace_call+0x15a/0x3b8 ftrace_graph_caller+0x0/0x1c 0x3e0007e3c98 <- ftraced function caller (should be do_filp_open+0x7c/0xe8) do_open_execat+0x70/0x1b8 __do_execve_file.isra.0+0x7d8/0x860 __s390x_sys_execve+0x56/0x68 system_call+0xdc/0x2d8 Note random "0x3e0007e3c98" stack value as ftraced function caller. This value causes either imprecise unwinder result or unwinding failure. That "0x3e0007e3c98" comes from r14 of ftraced function stack frame, which it haven't had a chance to initialize since the very first instruction calls ftrace code ("ftrace_caller"). (ftraced function might never save r14 as well). Nevertheless according to s390 ABI any function is called with stack frame allocated for it and r14 contains return address. "ftrace_caller" itself is called with "brasl %r0,ftrace_caller". So, to fix this issue simply always save traced function caller onto ftraced function stack frame. Reported-by: Sven Schnelle Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin commit 2168f2a8b908f7589371562a2bff6d5d0456c5da Author: Xinwei Kong Date: Fri Jan 3 10:52:10 2020 +0800 spi: dw: use "smp_mb()" to avoid sending spi data error [ Upstream commit bfda044533b213985bc62bd7ca96f2b984d21b80 ] Because of out-of-order execution about some CPU architecture, In this debug stage we find Completing spi interrupt enable -> prodrucing TXEI interrupt -> running "interrupt_transfer" function will prior to set "dw->rx and dws->rx_end" data, so this patch add memory barrier to enable dw->rx and dw->rx_end to be visible and solve to send SPI data error. eg: it will fix to this following low possibility error in testing environment which using SPI control to connect TPM Modules kernel: tpm tpm0: Operation Timed out kernel: tpm tpm0: tpm_relinquish_locality: : error -1 Signed-off-by: fengsheng Signed-off-by: Xinwei Kong Link: https://lore.kernel.org/r/1578019930-55858-1-git-send-email-kong.kongxinwei@hisilicon.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit c565487ff9d82f532346a2d0eaba75fe1844effe Author: Xiang Chen Date: Tue Nov 12 17:30:56 2019 +0800 scsi: hisi_sas: Check sas_port before using it [ Upstream commit 8c39673d5474b95374df2104dc1f65205c5278b8 ] Need to check the structure sas_port before using it. Link: https://lore.kernel.org/r/1573551059-107873-2-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen Signed-off-by: John Garry Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit b8ef8cd89a721a318fa611bfaed72ab90d28d180 Author: Aneesh Kumar K.V Date: Fri Aug 9 13:17:26 2019 +0530 libnvdimm: Fix endian conversion issues  commit 86aa66687442ef45909ff9814b82b4d2bb892294 upstream. nd_label->dpa issue was observed when trying to enable the namespace created with little-endian kernel on a big-endian kernel. That made me run `sparse` on the rest of the code and other changes are the result of that. Fixes: d9b83c756953 ("libnvdimm, btt: rework error clearing") Fixes: 9dedc73a4658 ("libnvdimm/btt: Fix LBA masking during 'free list' population") Reviewed-by: Vishal Verma Signed-off-by: Aneesh Kumar K.V Link: https://lore.kernel.org/r/20190809074726.27815-1-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 13cd297f15ed091f3af8f6ee4e60a53ee9253bb5 Author: Hannes Reinecke Date: Mon Oct 2 16:26:37 2017 +0200 scsi: scsi_devinfo: fixup string compare commit b8018b973c7cefa5eb386540130fa47315b8e337 upstream. When checking the model and vendor string we need to use the minimum value of either string, otherwise we'll miss out on wildcard matches. And we should take care when matching with zero size strings; results might be unpredictable. With this patch the rules for matching devinfo strings are as follows: - Vendor strings must match exactly - Empty Model strings will only match if the devinfo model is also empty - Model strings shorter than the devinfo model string will not match Fixes: 5e7ff2c ("SCSI: fix new bug in scsi_dev_info_list string matching") Signed-off-by: Hannes Reinecke Reviewed-by: Alan Stern Reviewed-by: Bart Van Assche Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman