To see what this program does, see after the "WHAT's NEW" section.
     
     What's new.

from 5.0 to 5.1     
     *Added  (in  F6 check prefix function) direct and  reciprocal  antenna
     heading  calculation  (short/long path), QRB  calculation  (short/long
     path, in Km and Miles), Sunrise and Sunset calculation.

     *Added   some   automatic-connection  string  enhancements,   to   fit
     autotelnet,   autologin,  autopassword,  autodummy  characters,   when
     connecting  foreign  DX Clusters via TCP nodes, see  TCP&TIPS.TXT  for
     details.

     *The antitimeout command now can be set into COMMANDS.INI (last line).

     *The  antitimeout  period now can be selected in a range of 1 to  400,
     with 1 minutes steps.

     *Added  the incoming talk flashing led: it becomes active when a  talk
     is received in NOHERE state (any arrow key to switch it off).

     *Incoming  talks  are now recognized also when the correspondent  uses
     the talk mode (T YOURCALL Enter, Text, Ctrl-Z).

     *The loop recorder allows now 12 playback speed levels to decode meteo
     scatter burst.

     *A monitor password can be requested instead of a monitor disk.

     New  files:  WAIT.EXE (usage: WAIT hh.mm, a utility to put into  batch
     files  to  start  DXHUNTER  at  programmed  times,  see  TCP&TIPS.TXT)
     LOCATOR.EXE  (a program used by DXHUNT when pressing F6);  LOCATOR.INI
     (holds your location and all DXCC countries with all the coordinates;
     it is used by LOCATOR.EXE calculations; you'll have to edit it and set
     your  location  for proper working); TCP&TIPS.TXT (with suggestions  &
     workarounds);   WHATSNEW.TXT  (this  file);  6M&VHF.TXT  (how  to  use
     DXHUNTER outside HF bands).

from 5.1 to 5.2

     *The  program can be linked directly to DXTelnet, to get and  analyse
     spots directly received via the Internet, see DXTelnet.TXT for info.

     *When quitting the program, you can exit to DOS directly, by pressing
     X, after Alt-X.
     
     *Now the program behaves as full featured during the first 30 minutes
     of freeware sessions (istead of 5 minutes).

     New files:  DXTelnet.TXT (containing info about how to link  DXHUNTER 
     to DXTelnet); 2SERIALS.TXT (containing info about how to use DXHUNTER
     on 2 simultaneous connections, via 2 serial ports)

     
     DXHUNTER'S FEATURES
     
     *DXHUNTER is a DOS, shareware, freely distributable program for PC and
     TNC modem (note: no BAYCOM modem support), for DX CLUSTER users.
     You  can  run  DXHUNTER  in a DOS  session  simultaneously  with  your
     favourite  programs, such as your log: PIF and ICO files are included,
     to  use the program under Windows, so you'll not have to abandon  your
     dear old LOG program, when adopting DXHUNTER.

     *Automatic  DXCC data import from different log types (such as DXBASE,
     TOPLOG, EASYLOG...).

     *Alert on New Ones: you can set an alert type and an alert duration;
     you  can  choose between 5 different new one classes to accept  (cell,
     band,  mode, band/mode, total). Allowed alert types are SOUND,  MUSIC,
     CW and VOICE; the CW and VOICE alert types execute the spelling of the
     alerted  spots (call and frequency) also on the PC speaker, making  it
     possible to remotize alert events via radio.

     *You  can  enable the announcement of any incoming spot, wich will  be
     performed  in CW or VOICE, by spelling spot's call and frequency, also
     on the PC speaker (useful for people who are blind).

     *Some  special features allow you to decide which alerts to accept, at
     a  spot's  CALL/FREQUENCY level; the band planning can be adjusted  to
     your needs.

     *Automatic  connection/reconnection  to  the DX CLUSTER, also  via  an
     unlimited  number of intermediate nodes: your presence is not  needed,
     even when the link drops.

     *Antitimeout function, to avoid inactivity disconnections.

     *A monitor mode function allows you to operate also when disconnected;
     a  smart anti spot repetition function avoids identical spots  display
     (this filter is active also when operating in connected mode, to avoid
     looped  spots repetition). The monitor mode function supports also the
     special spot format used on forward links, between cluster nodes!.

     *Incoming new ones are saved apart, on an active list: once you select
     an item from this list, you can play it (in CW or VOICE), you can send
     its  frequency to your RTX via RS232; the spots that currently  result
     to be more probable (because they were received into a one hour window
     centered on current z time) are displayed marked.

     *DXPED and SKED reminder, with automatic deletion of expired events:
     when  a  DXPED becomes active a visual warn is displayed; when a  SKED
     becomes active, a phone-like alert is executed.

     *Prefix  recognition without errors: the DXHUNTER is probably the best
     in  the  world in recognizing simple or slashed prefixes; if you  keep
     the  data  base updated, by adding or deleting prefixes  when  needed,
     you'll  get  the  best  from this program. An  on  line  prefix  check
     function,  allows you to check for any prefix getting useful info such
     as country name, needs, heading, QRB, sunset and sunrise.

     *Filter  on far away originated spots: some DX CLUSTERS collect  spots
     being  originated  from  far  away sites (i.e. spots  coming  via  the
     Internet);  very  often the far away originated DXes are not  feasible
     for  you; if you want to exclude alerts on these spots, you can act on
ÿ    the  originating field (DX de...) by filtering any originating country
     you  want  (unwanted  spots will not be alerted but  still  displayed,
     anyway).

     *Remote control on RTX via RS232 port. This control includes frequency
     and  mode setting on the RTX; the control can be manual (you  manually
     type  in the desired frequency and mode) or fully automatic (linked to
     the last received spot or the new one list).

     *Voice keyer (Sound Blaster like card needed): you can record up to 10
     voice  messages  on the fly and then send them back with a snap,  with
     PTT activation on a selected COM or LPT port.

     *Audio  loop recorder (Sound Blaster like card needed): you can record
     up  to 25/30 seconds of audio onto a circular RAM buffer (thus without
     disturbing  your  Hard  Disk);  you can keep  your  recording  session
     working  for  unlimited time; at any time you'll be able to play  back
     the  last  25/30  seconds  of the  current  recording,  marking  audio
     portions  to  relisten, with saving capability; you can also select  a
     slower  or faster playback with 12 speed levels: useful for CW/Scatter
     relisten.   A  switch  signal  to  redirect  audio  to  headphones  is
     included.

     *Text  and audio file capture/storage functions (for audio features  a
     Sound   Blaster  like  card  is  needed);  a   multimedia   text/audio
     archiviation  program  is  included;  during  the  audio  playback  an
     hardware switch is activated, to redirect the audio to the headphones.

     *Automatic CW Key (from 5 up to 100 WPM); you can simulate your CW key
     with  very  regular transmission with simple keystrokes  or  recalling
     preset  strings; the key switch is performed via a selected COM or LPT
     port, in a CT like standard.

     *Unlimited  spot word search function; you can search for any word you
     want  on an entire DX spot, or just on the comment field; you can also
     search  for  IOTA  or  LOCATOR strings in the comment  field;  when  a
     searched word is found, an alert is executed.

     *Full support for communication ports with non standard IRQ & AD.

     *RF  disturb  robustness:  some programs block when  RF  disturbs  the
     serial  port;  the  DXHUNTER simply warns you that you're  causing  RF
     disturbs and you might loose data.

     *Screen capacity selectable, up to 50 text lines.

     *Automatic  talk reply in NOHERE state: you can set a standard message
     that  will be automatically sent as an answer to anybody attempting to
     talk  to you, when you are in a NOHERE state, and a flashing led  will
     be activated to warn you.

     *Save  disk space option (when enabled, all the lists are kept limited
     in size).

     *Night  mode  feature,  with  blank screen operation  (the  screen  is
     restored when an alert occurs or at user's keystrokes).

     *Minimum  hardware requirements (the program runs on any PC, from 8088
     up, also from floppy disk).

     *Different acoustic signalling of DX spots, talks, or other messages.

     *TCP connecting facilities such as autologin, autopassword, autotelnet
     and so on...

     *Link to DXTelnet, in order to get and analyse spots directly received
     via the Internet.

     *Self  documented  functions,  with  on line brief  help  comments  in
     english  language;  a  printable, justified and page  formatted  ASCII
     manual  in english language is also included; the manual is  schematic
     and  complete  at  the same time; it has been divided  into  different
     sections  for  easier  info retrieval (italian  language  program  and
     manual  also  available upon request); the manual also  includes  some
     schemes  to  build the simple required interfaces (PTT, audio  switch,
     RS232<>TTL to drive the RTX).

     This, and much more, make the DXHUNTER a unique program.
     Believe me, it will raise up your score dramatically.
     Many big DXers (scores over 310) are currently using the DXHUNTER with
     success and satisfaction: they consider it an indispensible DX tool.

     For more details, read the manual sections into the DOC directory.



     THE DXHUNTER: THE SOFT WAY OF HUNTING!!!.