CATLink Pro For the Yaesu FT-736R "736demo.ZIP" contains "CATLink Pro Demo for the Yaesu FT-736R" and all neccessary files.It is a Windows program for Win3.x,Win95,and WinNT. CATLink Pro allows computer control of the Yaesu FT-736R VHF/UHF all mode transceiver through an interface such as the Yaesu FIF-232C. Some of the features of CATLink Pro are described below. 1.A graphical representation of a ham radio. 2.Individual tuning and display of VFO-A,VFO-B,SAT-RX VFO Mode-B,SAT-TX VFO Mode-B,SAT-RX VFO Mode-J,and SAT-TX VFO Mode-J. 3.Full control of satellite frequency during Mode-B or Mode-J operation. (I.E.Individual,Normal,and Reverse tuning of satellite uplink and downlink.) 4.Ability to operate in Dual VFO and modes. 5.Control Of frequency offset. 6.Memorize and reinitialize the last used frequencies and modes of each VFO on program startup. 7.Tuning steps for 100hz,5khz,10khz,100khz,500khz,and 1mhz. 8.Fine tuning in 1hz steps.(Not posible from front panel) 9.Ten Call Memory channels on the main display. 11.Two Recall selections for favorite memories. 12.Sixty memories for VFO-A,sixty memories for VFO-B,and thirty pairs of memories for satellite operation.(VFO-A and VFO-B memories also memorize the offset as well) 13.PTT and PTT Lock functions. 14.Lock selection to disable any input. 15.CTCSS input with selection from tone map. 16.Decode and Incode selections 17.Easy input of AQS related data.(I.E.Callsign/IDset,Group Code,and Digital Message) 18.Memorize and reinitialize Callsign/IDset,Group Code,and Digital Message for AQS operation. 19.Send,Receive,and display AQS Message. 20.Digital squelch control. 21.CAC (Channel Access Call) with reset function. 22.Built-in Logging with Search database. 23.Built-in text editor. 24.A clock.:) 25.Ability to change the color of the VFO,Offset,and Clock displays by clicking on one of the four frequency displays. This demo and all related files may be distributed freely. Any comments my be directed by Email to- Gary C. Stotts catlink@erols.com